Industry 4.0 and Digital Innovation in Manufacturing: State of the Art Technology and Future Prospects in the Italian Mechanical Engineering Sector

Authors

  • Angelo Gasparre University of Genoa
  • Luca Beltrametti University of Genoa
  • Luca Persico University of Genoa

DOI:

https://doi.org/10.19245/25.05.pij.6.2.3

Keywords:

Industry 4.0, Digital Transformation, Advanced Manufacturing, Mechanical Engineering, Italy

Abstract

The label ‘Industry 4.0’ has captured increasing attention in recent years. However, despite impressive media coverage, EU activism, and being featured in many government programs, the picture of the actual diffusion and realistic industrial potential of the so-called ‘Industry 4.0 enabling technologies’ is still unclear. Far from filling this gap at the European or global level, in this paper we focus one specific, though relevant, industrial domain: the Italian mechanical engineering sector. The analysis shows the magnitude of a phenomenon that has undoubtedly been subject to some excessive rhetoric. Nevertheless, our findings show that things are progressing as the early adopters (mostly large businesses) are beginning to invest in and develop strategic plans for future action. However, most players such as small-sized family-owned enterprises are simply looking at the moment, and do not appear to have a strategy in approaching Industry 4.0 or any plan for getting on board in the near future, and this is something industrial and political leaders should take note.

References

Almada-Lobo, F. (2015), “The industry 4.0 revolution and the future of Manufacturing Execution Systems (MES)”, Journal of Innovation Management, 3 (4): 16–21.

Bloem, J., van Doorn, M., Duivestein, S., Excoffier, D. Maas, R., and van Ommeren, E. (2014), The Fourth Industrial Revolution. Things to Tighten the Link Between IT and OT, Sogeti: VINT.

Cirillo, V., Fanti, L., Mina, A., and Ricci, A. (2020), Digitizing firms: skills, work organization and the adoption of new enabling technologies, INAPP Working Paper n. 53, http://oa.inapp.org/xmlui/handle/123456789/730.

De Socio A., Finaldi Russo P. (2016), “The debt of Italian non.financial firms: an international comparison”, Banca d’Italia Questioni di Economia e Finanza (Occasional Papers), n. 308, February.

Evans, P., and Annunziata, M. (2012), Industrial Internet. Pushing the Boundaries of Minds and Machines, General Electric.

Garibbo, A., and Arricchiello V. (2018) (eds) Technology Trends Digest, A selection of technologies that are to revolutionize our lives. Third edition. The POLARIS Innovation Journal Paperbacks, Leonardo, Rome.

Hermann, M., Pentek, T., and Otto, B. (2015), “Design Principles for Industrie 4.0 Scenarios: A Literature Review”, Working Paper n. 1, Technische Universität Dortmund Fakultät Maschinenbau, Audi Stiftungslehrstuhl Supply Net Order Management.

Hong, S., Oxley, L., and McCann, P. (2012). “A Survey of the Innovation Surveys”, Journal of Economic Surveys, 26: 420-444.

Jäger, A. Moll, C., Som, O., and Zanker, C. (2015), Analysis of the impact of robotic systems on employment in the European Union, DOI: 10.2759/516348.

Kagermann, H., Wahlster, W., and Helbig, J. (2013), Securing the future of German manufacturing industry. Recommendations for implementing the strategic initiative. Final report of the Industrie 4.0 Working Group, acatech – National Academy of Science and Engineering.

Lambert, D. (1992), “Zero inflated Poisson Regression with an application to defects in manufacturing”, Technometrics, 34: 1–14.

Metzger, T. (2016) (eds), The German Standardization Roadmap for Industry 4.0 – Version 2, DIN e. V., Berlin.

MISE (2018), La diffusione delle imprese 4.0 e le politiche: evidenze 2017, Ministero dello sviluppo economico, https://www.mise.gov.it/images/stories/documenti/Rapporto-MiSE-MetI40.pdf

Muscio, A., and Ciffolilli, A. (2017), “Industry 4.0: a redefinition of European manufacturing”, Working Paper, DOI: 10.13140/RG.2.2.28679.60323

PwC (2015) Industry 4.0: Building the digital enterprise, PwC.

Schivardi F. and Schmitz T. (2020), “The IT Revolution and Southern Europe’s Two Lost Decades”, Journal of the European Economic Association, 18 (5): 2441–2486.

Smit, J., Kreutzer, S., Moeller, C., and Carlber, M. (2016), Industry 4.0, Policy Department A: Economic and Scientific Policy, European Parliament, Brussels.

Staufen (2016), Germany Industry 4.0 Index 2016. A study by Staufen AG and Staufen Digital Workx GmbH, Staufen.

Staufen Italia (2015) Industria 4.0. Sulla strada della fabbrica del futuro. Qual è la situazione dell’Italia? [Industry 4.0. On the path to the factory of the future. What is the situation in Italy?] Staufen Italia.

Walendowski, J., Soto Rojas, V.E., and Kroll, H. (2015), Regional Innovation Monitor Plus 2015 – Thematic Paper 1 – Mapping advanced manufacturing networks and exploring new business opportunities. Technopolis Group and Fraunhofer ISI report to the European Commission DG Internal Market, Industry, Entrepreneurship and SMEs, Directorate J – Industrial Property, Innovation and Standards.

Washington, S., Karlaftis, M., and Mannering, F. (2003), Statistical and econometric methods for transportation data analysis. Chapman and Hall/CRC, Boca Raton.

Downloads

Published

2021-05-24

How to Cite

Gasparre, A., Beltrametti, L., & Persico, L. (2021). Industry 4.0 and Digital Innovation in Manufacturing: State of the Art Technology and Future Prospects in the Italian Mechanical Engineering Sector. PuntOorg International Journal, 6(2), 99–111. https://doi.org/10.19245/25.05.pij.6.2.3